Tuning of PPI Automotive model Audi R8.

Not long ago, tuning shop PPI Automotive Design presented its latest project at Top Marques Monaco. Last tuning package from the company was presented specifically for the model Audi R8. Therefore, the name of an updated version of this model gave Audi R8 PPI Razor GTR-10. Tuning studio engineers have worked on increasing productivity, working to reduce overall vehicle weight, to improve the manageability of the model, especially in poor roads, as well as, of course, on the improvement of exterior design and strengthen the work of the unit. Changes undergone in the first engine. The new ten-power motor has 601 horsepower, the engine speed at 7400 rpm. The index of maximum torque is 565 Nm now, with aggregate speed 6400 rpm. After a series of papers on a new engine tuning studio engineers came to the conclusion that the new engine will not have turbines and compressors. Motor of the new model Audi R8 PPI Razor GTR-10 will be totally atmospheric. Car Audi R8 PPI Razor GTR-10 dropped a 250 kilogram of body weight, leading to improved performance acceleration, until the first hundred. Now the owner of this model speed of 100 kilometers per hour can be seen only by 3.2 seconds. And, the maximum rate corresponds to around 335 miles per hour. Model Audi R8 PPI Razor GTR-10 is equipped with a new gearbox, which is called the R-tronic Gearbox. Every car enthusiast, especially someone who is an avid lover of models of production Audi, it will be interesting to know how the weight has been reduced to such an impressive figure, but rather 250 kilograms. The answer is simple. Engineers tuning company in the design model Audi R8 PPI Razor GTR-10 used a carbon fiber, as well as other composite materials. This type of material can be found on the door casing, sills, roof, as well as a bumper model Audi R8 PPI Razor GTR-10. Compared with the factory version of the model Audi R8, the external design updated model Audi R8 PPI Razor GTR-10 became a dynamic, sporty and modern. Since the tuning company engineers have given a new form of the wings of the car body, and also added entirely new elements, such as diffuser and spoiler. Carbon can be found in the inner interior of the cabin, such as a lever, which is designed to switch gears on the parking brake, as well as on the center console, and it's not the whole list of interior, which made of carbon fiber. Aerodynamic body kit also made of carbon fiber. The front bumper of the new model Audi R8 PPI Razor GTR-10 is equipped with enlarged air intakes and LED-dimensions. Another new feature of the new model of tuning companies are the side skirts with air intakes, the main task is to provide additional cooling oil coolers and rear brake system. Would not be a model Audi R8 PPI Razor GTR-10 supercar, with no doors and door frames, made of carbon fiber. The hind wings of the car, which made the same carbon fiber has a special feature that allows you to tilt at any convenient angle. Cover the motor car Audi R8 PPI Razor GTR-10 is made of carbon fiber. Ground clearance model Audi R8 PPI Razor GTR-10 has been reduced due to the springs from KW Automotive, as well as the hydraulic lifting system, which was used for the front axle. The main objective of the hydraulic lift system is to increase the clearance, if necessary by 45 millimeters. Of course, the same can not be said about the tires and disks that bind model Audi R8 PPI Razor GTR-10 expensive. This car is equipped with aluminum wheels PPI 19x9, and tires, which are called Michelin Pilot Sport 2, the dimension, which is the mark of 245/35/19, but as an option are 325/25/20 tires. Car Audi R8 PPI Razor GTR-10 released a limited edition. But it is not strange, since everyone knows that such expensive cars can only afford a rich collectors. The high price of this model set, of course, the same purpose. Since the material that was used by engineers tuning studio is very expensive.